A common question that is asked when it comes to hose and tubing is, is it certified for food and drinking water applications? Sometimes there is confusion and nothing concrete that specifies if the tube is in fact safe for food and drinking. So, what did Boshart do about it?
In this blog, we take a closer look at Clear PVC braided hose and PVC Clear tubing, looking specifically at their certifications and the changes that Boshart Industries made to ensure there is no confusion when it comes to our hose and tubing.
Our PVC braided hose is designed for potable water lines, pneumatic systems, vacuum and
It is not only fire resistance but it is also self extinguishing and silicone free with high tensile strength reinforcements. You can also count on it to operate reliably with a temperature range of 25°F to 150°F.
Ideal for potable water lines, deionized water systems and pneumatic and air application,
It is certified to NSF-61 & NSF-51 for food equipment, drinking water and low lead content. It has the same temperature rating as the braided hose, 25°F to 150°F, making it trusted for critical applications.
Yes! We recently made some changes to our tubing and hose, working closely with Manufacturers to certify these products to meet both NSF/ANSI 51 & NSF/ANSI 61 Standard Certifications for food and potable water.
To help squash any confusion, Boshart made the decision to change part numbers, which better reflect the certifications.
The part numbers now start with PW = Potable Water (certifications)
These new part numbers ensure that when you order the certified product, you will know that they are equipped with the NSF-61 and NSF-51 certification. The markings for both certifications will also be found directly on the hose or tubing. Including the markers will allow installers and inspectors to easily verify the certification, eliminating any confusion!
PWH Series (Potable Water Hose) PWT Series (Potable Water Tubing)
NSF/ANSI 51 - Food Equipment Materials
This publication was recently revised, bringing in the standard in alignment with the final rule requiring the U.S Environmental Protection Agency (EPA) Safe Water Act regarding the use of lead-free pipes, fixtures, solder and fittings for drinking water. The national requirements for lead in drinking has drastically evolved at different points over time.
NSF/ANSI 51 has followed each federal requirement change, ensuring that the materials used in the construction of commercial food equipment that may have any contact with coffee, tea or water intended for human consumption, continues to align with the Federal requirements.
NSF/ANSI 61 - Drinking Water System Components - Health Effects
This standard is an American National Standard that established minimum health effect requirements for any chemical contaminants and impurities that directly impact drinking water from any products, components and materials used in drinking water systems.
This standard however does not establish performance or taste and odor requirements for drinking water system products, materials or components.
In Conclusion:
These changes that Boshart Industries has made to the Clear PVC braided hose and tubing, including the part number change, are going to help with any confusion and will allow installers to use them in food and drinking water applications.
Head over to Boshart's Knowledge Base: technical product information, guidelines, and more.