BoshartU was born from a collaboration with multiple departments at Boshart like Quality Assurance, Research and development and Sales and Marketing. We write blogs to educate you on plumbing, water well, Waterworks, HVAC, irrigation, industrial, pool and spa and sump and sewage products.
We have created a series where we take our blogs, starting from the very beginning, and put them into videos.
To view all of our blogs that we have turned into videos, head to BoshartU & don’t forget to subscribe!
This video is based off of a blog we wrote called “3 Reasons to Install a Relief Valve". The original blog was published on November 13, 2019. To view the original blog, check it out here. Or, read the transcript below.
Hi, I’m Braedlyn McEwen and today we are going to talk about Relief Valves.
Relief valves are a strong and mighty product. They normally hide in the background, but when it's their time to shine, they tend to steal the show. They are designed to help protect pressure tanks from too much pressure build up. So, why should you install one?
In this video, we will cover three reasons we believe you should install a relief valve and go over what a relief valve is and it's main purpose. Let's get started.
They save time
Time is important to us all. We don't want to be wasting time on lengthy installation processes when we could be hanging out with friends or family. Relief valves are easy to install, saving you time.
A relief valve is a safety device that prevents pressure from exceeding it's
Blockages could be caused by an accidental closing of a shut off valve. If a relief valve is not installed and the pressure inside the pressure tank goes higher than the capacity, there will be severe system failures.
An important part of the installation process is to ensure you have properly ran the drain pipe to an open floor drain or another safe area that can handle the pumps capacity.
Relief valves should never be capped or plugged, there always needs to be somewhere for the excess water to drain. The drain pipe should also be downward from the valve. As seen in the picture, there are arrows that should be followed during installation to ensure the relief valve is properly positioned.
Relief valves will begin to open when a certain amount of pressure starts building up. Once the pressure is at a specific level, the relief valve will kick in and will release the overflow of pressure, essentially saving your pressure tank from exploding. What a relief.
They are economical
Saving money may be important, but it is also important to have quality products that you can rely on. Relief valves can be found in Stainless Steel, Brass and PVC, ensuring that there is a relief valve for every application. Relief valves have a low initial cost and can save you quite a bit of money down the road.
Selecting a pressure relief valve that can maintain a maximum pressure below the system's design pressure is important. You can determine this by finding out the maximum pressure rating of the pressure tank.
This is crucial because the relief valves job is to handle the extra pressure if the pressure inside the tank exceeds the amount it is able to handle. If the relief valves capabilities are higher than the tanks capabilities then the tank would burst before the relief valve was able to do it's job.
Relief valves should be installed as close to the tank as possible and installed on the cold water line. Relief valves don't have a lot of applications, but where they are used they serve an important purpose.
Safety is something that is important to a lot of us. We think about safety all the time and are constantly thinking of new ways to make things safer. Relief valves are required to protect the system in an emergency, ensuring that the water can be safely drained. They are installed for protection and peace of mind.
Relief valves are available already set at specific Pounds per Square Inch (PSI). Field adjustments are not recommended but if they are required, in order to ensure safety, a test must be done to verify that the changed settings will still allow pressure to be relieved to the capacity of the entire system.
If this is not done, it could cause serious damage to the system and to individuals. Relief valves hopefully never have to be used, but why take the risk? If safety is your main concern then installing a relief valve is a no brainer.
To sum this up, Relief valves are a simple product that can be a real lifesaver when installed. If you have a pressure tank, it may be a good idea to get a relief valve that will work best for you and your application.
Being educated about products that are designed to help you can ultimately save you time, will save you money in the long run and will protect you and keep everyone safe.
This video is based off of a blog we wrote called “3 Reasons to Install a Relief Valve?". To view the original blog, check it out here.
Head over to Boshart's Knowledge Base: technical product information, guidelines, and more.