Tape sealants are found all over the plumbing world. They are used in many Industries as there are different tape sealants for specific applications. If you need tape specifically for stainless fittings, there's a tape for that. Tape sealants are simple to use, but like most things if not used correctly it can cause you stress and stress on the fittings.
In this blog, we are going to go over the different tape sealants available and what the best applications are for each tape.
Polytetrafluoroethylene, is short formed to PTFE, for obvious reasons. PTFE is hydrophobic which basically means neither water or liquids containing water can make PTFE tape wet. PTFE is less likely to cause friction against other solids.
The main difference between standard PTFE tapes and specialty PTFE tapes is that the specialty tapes come color coded for specific applications. This makes it easy to ensure you are grabbing the correct tape for each application. Specialty PTFE tape is also much thicker than the standard tape and it has significantly higher density.
The white premium PTFE tape is good to be used for all industrial applications. There is no pigments or additives making it good to be used on all applications including water, oil, and food processing. Mainly places where non-contamination standards are set pretty high.
This PTFE tape is designed specifically for gas lines of all types, propane, butane lines, and even natural gas. This yellow PTFE tape meets all gas company standards worldwide and it seals threads quickly and easily.
The Gray Stainless tape has nickel pigment color added ensuring it is good to be used with all
By using a PTFE tape sealant with a minimum thickness of 2.5 mil. you ensure that the tape is thick enough to provide a good seal and you won't waste tape. To ensure a good seal, wrap the tape in the direction of the threads. You only need to use 2-3 wraps of tape, however, thinner tape may need 4-5 wraps. Make sure you start wrapping at the end of the fitting, covering the end to prevent the thread from seizing. For the joint assembly, you should tighten the threaded joint 1-2 turns beyond finger tight, be careful not to over tighten.
Also, be aware of how much tape you are using. Excess tape increases the diameter of the male thread adding additional stress. However, tape that is too thin will not provide good sealing.
An important thing to remember is that PTFE tape should not be used when connecting PVC fittings or valves with a female (FPT) thread. If the tape is used on female connections, a wedging action can occur which will cause major stress on the joint during assembly.
PTFE tape does not guarantee a leak free connection. Make sure you always inspect the connections with water pressure to confirm that the connection is not leaking.
Knowing how to correctly wrap PTFE tape is the key to easy and stress free installations. Having specific tape sealants color coded for different applications makes it even easier. Bookmark this simple guide as your go-to the next time you need to properly wrap a fitting, maybe even show a friend how to properly use the sealing tape. As I like to say, sharing is caring.
Head over to Boshart's Knowledge Base: technical product information, guidelines, and more.